Hydraulic-Cylinder Linkages
Use the published HCR12S dimensions and mounting geometry to review cylinder-side linkage fit.
Size 40 / M27x2 thread / 100 mm outer diameter / 153 mm lengthROD END / HEIM JOINT
HCR12S-40 Hydraulic Rod End Bearing, 40 mm Size
Part No.: HCR12S-40
· Male & female version available
✓ ISO 9001 Certified
✓ SGS Verified
✓ 26+ Years Factory
✓ OEM / ODM Ready
Size 40 mm
Thread pitch M27x2
Diameter 45 mm
Dynamic load 100 kN
Static load 156 kN
Tilt angle 7°
Bearing Shell
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
Inner Ring
100cr6 / aisi 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment
⚡ Typically responds within 24 hours
MOQ:50 pcs / model
Lead Time:7–15 days
Sample:Free (excl. freight)
Payment:T/T · PayPal · L/C
Overview
Hydraulic Rod End Bearing HCR12S Product Overview
HCR12S-40 is a metric hydraulic-cylinder rod end bearing for compact cylinder-side linkage assemblies. It combines a Forged, heat-treated C45 / AISI 1045 steel housing with a bearing shell and inner ring made from 100Cr6 / AISI 52100 bearing steel, hardened and ground; phosphate and molybdenum-disulfide surface treatment. It uses a right-hand M27x2 thread.
The size-40 configuration has a 100 mm outer diameter, 28 mm inner ring width, 23 mm bearing width, 105 mm medium length, 45 mm diameter, 37 mm thread length, 153 mm overall length. Published performance values are 43-120 μm internal clearance, 100 kN dynamic load rating, 156 kN static load rating, 90 mm collar diameter, 7° tilt angle, 49 Nm torque, and approximately 2160 g weight.
Hydraulic grease nipple to DIN 71412. The stated operating range is -50°C to +150°C. Confirm the cylinder geometry, side-load condition, clearance, lubrication access, and final material requirements against the HCR12S specification before production release.
Size Chart
Hydraulic Rod End Bearing HCR12S Series — Full Size Range
All available sizes in the Hydraulic Rod End Bearing HCR12S series. Can’t find your size? Contact us for custom dimensions.
| Part no. | [D] Size | [G] Thread pitch | [A] Outer diameter (mm) | [B] Inner ring width (mm) | [M] Bearing width (mm) | [F] Medium length (mm) | [J] Diameter (mm) | [GL] Thread length (mm) | [L] Length (mm) | Internal clearance (μm) | [M1] Width (mm) | Dynamic load rating (kN) | Static load rating (kN) | [K] Collar diameter (mm) | Tilt angle (°) | Torque (Nm) | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HCR12S-12 | 12 | M10x1,25 | 35 | 10 | 8 | 42 | 17 | 15 | 58 | 23-68 | 13 | 10.8 | 17 | 40 | 11 | 10 | 120 |
| HCR12S-16 | 16 | M12x1,25 | 45 | 14 | 11 | 48 | 21 | 17 | 69 | 30-82 | 13 | 21.1 | 28.5 | 45 | 10 | 10 | 220 |
| HCR12S-20 | 20 | M14x1,5 | 55 | 16 | 13 | 58 | 25 | 19 | 83 | 30-82 | 17 | 30 | 42.5 | 55 | 9 | 25 | 430 |
| HCR12S-25 | 25 | M16x1,5 | 65 | 20 | 17 | 68 | 30 | 23 | 99 | 37-100 | 17 | 48 | 67 | 62 | 7 | 25 | 670 |
| HCR12S-30 | 30 | M20x1,5 | 80 | 22 | 19 | 85 | 36 | 29 | 123 | 37-100 | 19 | 62 | 108 | 77 | 6 | 49 | 1250 |
| HCR12S-40 | 40 | M27x2 | 100 | 28 | 23 | 105 | 45 | 37 | 153 | 43-120 | 23 | 100 | 156 | 90 | 7 | 49 | 2160 |
| HCR12S-50 | 50 | M33x2 | 120 | 35 | 30 | 130 | 55 | 46 | 188 | 43-120 | 30 | 156 | 245 | 105 | 6 | 86 | 3900 |
| HCR12S-60 | 60 | M42x2 | 160 | 44 | 38 | 150 | 68 | 57 | 230 | 43-120 | 38 | 245 | 380 | 134 | 6 | 210 | 7150 |
| HCR12S-80 | 80 | M48x2 | 205 | 55 | 47 | 185 | 90 | 64 | 282.5 | 55-142 | 47 | 400 | 585 | 156 | 6 | 410 | 15000 |
| HCR12S-100 | 100 | M64x3 | 240 | 70 | 55 | 240 | 110 | 86 | 357.5 | 65-165 | 55 | 610 | 865 | 190 | 7 | 710 | 27300 |
Quality Control
Every Unit Inspected Before Shipment
Raw Material Inspection
Material certifications verified. Composition confirmed by spectrometer before machining begins.
Thread Gauge Inspection
100% go/no-go gauge check on all threaded sections. Zero tolerance on dimensional non-conformance.
Load Capacity Test
Static and dynamic load tests run on representative samples from each production batch.
Dimensional Measurement
CMM verification of critical dimensions — ball diameter, bore, thread pitch, and body length.
Surface Inspection
Visual and tactile inspection for burrs, scratches, surface cracks, and plating defects.
Articulation Test
Misalignment angle and torque measured to confirm liner performance meets specification.
Heat Treatment Verify
Hardness tests confirm proper heat treatment on chromoly steel bodies and bearing balls.
Batch Documentation
Full traceability from raw material heat number to finished part. COC and inspection reports available.
Applications
Where Hydraulic Rod End Bearing HCR12S Rod Ends Are Used
Related Products
All Products →More from the Hydraulic Rod End Bearing HCR12S Series
Get a Quote
Request a Quote for the Hydraulic Rod End Bearing HCR12S Series
Share your part number, required quantity, and any special material or packaging requirements. We respond within 24 hours.
Email
⚡ Reply in 24 hrs
🎁 Free samples
🔒 NDA available
📦 MOQ from 50 pcs
FAQ
Hydraulic Rod End Bearing HCR12S Frequently Asked Questions
Что такое серия HCR12S?
HCR12S — метрическая серия род-энд подшипников гидроцилиндров с опубликованными данными по размерам, зазорам, нагрузкам и заказу.
Какие размеры HCR12S опубликованы?
Опубликованная таблица спецификаций HCR12S содержит 10 размеров в указанном диапазоне.
Какой материал используется для HCR12S?
Вкладыш подшипника и внутреннее кольцо: подшипниковая сталь 100Cr6 / AISI 52100, закаленная и шлифованная, с фосфатированием и обработкой дисульфидом молибдена. …
Как осуществляется смазка HCR12S?
Размер 12 не повторно смазываемый; размеры 16–50 используют смазочное отверстие в корпусе; большие размеры — гидравлическую масленку DIN 71412.
Какой температурный диапазон указан для HCR12S?
Страница HCR12S указывает рабочий диапазон от -50°C до +150°C при заявленной конфигурации материала и смазки.
Что нужно предоставить для коммерческого предложения на HCR12S?
Укажите требуемый размер, монтажную геометрию со стороны цилиндра или чертеж, информацию о режиме работы и любые требования к смазке или материалу.